craigslist | tools in jackson, MS

HOMELITE CHAINSAW (PEARL,MS) $100

2009-11-08T19:37:53-05:00

Like new homelite chainsaw only 6 months old used twice and havent needed it since, 33cc with a 16 inch bar comes with chain guard and hard case.

Table Saw / Router & Table & Tools (Flowood / Rez) $375

2009-11-08T16:31:15-05:00

I have for sale a Hitachi 10" Table saw. A Ryobi router & ryobi router table. Makita miter saw. Various router bits, pipe & bar clamps. A Milwaukee jig saw. Asking $375 for all, but will accept offers. So don't hesitate to contact me by email. I will get back to you quickly. Moving and I need to sell this stuff. All in working condition.






Post big pictures on craigslist	more pics →

Werner Expandable Metal Ladder (Jackson, MS) $95

2009-11-08T14:44:30-05:00

Never used Werner metal expandable 30 ft. ladder. Half price. Asking $95.00. Pictures below don't show all you can do with this great latter. Call Liz at 434-981-4969. Local buyers only, cash only, no advertisers or scams please don't waste my time. You can pick up its ready to go.

_~* American Machine & Hydraulic Blue Boy Tube Bender *~_ (Jackson) $1800

2009-11-08T12:45:00-05:00

Golfballs luxurylink coupons

Hot Rod Relics

Our passion is Hot Rods and Building Performance Engines!
Over 40 years experience building/restoring/customizing cars.

American Machine & Hydraulic - Blue Boy Tubing Bender

Compare with used online for $7950.00!

Capacity (Mild Steel)
Bending:	3/4"- 3"
Swaging:	3/4"- 3"
Hydra-Sizer Expanding:	1 1/4"- 3"
Depth Of Bend:	0- 180 Degrees
Dimensions (L x W x H):	64" x 36" x 43"

Has plenty of dies and accessories you need for your shop!
Great for exhaust work, roll cages, or frames!

For almost 1/3 the online used price!!
Only $1800.00!

Hot Rod Relics - Owner/Operator Robert Kenney
We don't hide damage - if it has rust we will try to show you, any 40-50 yr old car WILL have rust.

Talk to us if you have a project you want built, or help building your dream Hot Rod!

Robert Kenney
601-260-7905

M-F 9am to 5pm
427 Highway 80 West
Jackson, MS 39201

Keyword: American Eagle, Abarth, Allard, AMC, Auto, Bagged, Barracuda, BMW, Bonneville, Big, Camaro, Clifford, Cadillac, Chevy, Chevrolet, Cuda, Cruzer, Conversion, Cruiser, Diesel, Dodge, Demon, Edelbrock, Eagle, Escalade, Firebird, Ford, Futurua, Ferrari, Gremlin, Gear, Holden, Hot Rod, Hi Injection, Jacked up, Kaiser, K Car, Lincoln, Lambo, Lamborghini, Mustang, Masserati, Mercury, Muscle, MOPAR, Nova, Nitrous, NOS, Olds, Oldsmobile, Plymouth, Pantera, Quadra Jet, Rolls, Rover, Riviera, Restoration, Super Bird, Slant 6, Supercharger, Turbo, Turbocharger, Unibody, V8, V6, I6, big block, flathead, small block, Rebuild, Repair, Welding, Fabrication, Custom, Paint, Body, Auto, Bucket Seats, Console, Dash, Radio, Tuck n Roll, pleats, Interior, AC, Air Conditioning, R134, R12, Glove Box, Wipers, Wiring, Painless, Fuse Box, Carpet, Vinyl, Leather, Stereo, Audio, Dampening, Soundproofing

Cherry Picker Winch Type Engine Hoist-Homemade (Florence, MS) $75

2009-11-08T11:33:45-05:00

This is a homemade heavy duty engine hoist (Cherry Picker). It is made of heavy metal four inch C channel legs and six inch steel wheels. The base measure is 84 1/2 inches from back to front of legs. It has a seven inch steel winch with 1/4 inch steel cable. The center pipes measure three inches for the bottom section and 2 1/2 inches for the top section. The height of the unit is 78 1/2 inches high with beem being level. The upper beam or steel pipe with steel four inch pulley assembly attached at the end is 84 1/2 inches long. The overall height is 126 inches high. The buyer will be responsible for hauling as this would be a local sale. The Cherry Picket does fit well in a pickup bed. The legs are long enough that you can lean it back to get the wheels on the tailgate and slide it forward into the bed. Then you can use the hook to secure it to the truck bed. I do not know the actual weight. I put 150 pounds which is close but I do not know the exact weight.

Miller 175 amp Mig welder (Brandon) $750

2009-11-08T08:35:04-05:00

Up for sale is my rarely used Miller 175. It is a powerful medium duty 230v wire welder. Comes complete with roll around cart and full gas cylinder w/regulator. Amperage range is from 30a-175a.
Bought to do stuff around the house and just don't use it enough. Gas cylinder is MINE-not a rental, paid ($160) for the tank from Cap-Weld. Similar new Miller 185 sells for $987 without cart and gas cylinder. What this means, is you can start welding today! I'll throw in an auto darkening Miller helemt and spare tips as well. Only has 2-3 hours of usage and looks near new.I have all instruction manuals for welder and helmet. Valued at $750/OBO

40 FT CARGO TRAILER (MORTON) $7800

2009-11-07T17:44:31-05:00

car trailer with drop gate a/c radio gooseneck hydralic lift call 601-946-8539 Jody

Ridgid Brand Job Box (Madison, ms) $200

2009-11-07T08:48:22-05:00

I have a new Ridgid Brand Job Box with casters. I bought it from Home Depot and do not need it. It is a 4' x 2' job box.

MEN'S Insulated Coverall's (n. jackson) $30

2009-11-07T08:35:28-05:00

42" waist . large size . zippered legs to fit over boots if needed.

snap on tool box (byram, ms) $2600

2009-11-05T15:23:43-05:00

snap on roll cab tool box.. 1 year old. its the classic 88 nhra special edition tool box..
11 drawer box. very nice...

Tools, Tools, Tools (Florence,MS)

2009-11-05T00:04:43-05:00

I have an assortment of tools that I have from when I bought out a pawn shop that was going out of business. They mostly consist of power tools.
I will take any reasonable offer. If you would like to look at the tools feel free to contact me. I will sell all of them in a lot or sell them individually.
I have some of the pictures posted but I have a lot of tools not pictured so please contact me to look at them in person.

Ladder / Pipe Rack (Vicksburg) $40

2009-11-04T23:49:51-05:00

I took this off my truck several weeks ago. It's been listed before but I came off the price a little because I really want it out from in front of my shop. It was on an '84 f-150 with a long wheel base if that gives reference to what it will fit. It is in good shape. Made out of square tubing. I bought it a long time ago. When I got it, it did have a lot of surface rust. I sanded it all down and painted it. Since then, it has served me well. I just don't need it anymore. I will sell it for $40. I won't go any lower. The metal on it is worth that much. I can be reached at 601-618-1703.

Casting Furnace (Pearl, MS) $600

2009-11-03T15:01:31-05:00

Johnson Gas Appliance Co. casting furnace
Furnace and Gas control unit
works great
now set up for propane (can be converted back to natural gas)

Call Jeff 601-573-1111 (NO EMAILS PLEASE)

ATV, Motorcycle cylinder Boring Machine (Pearl, MS ) $1500

2009-11-03T13:41:59-05:00

CYCLECYL BOREMASTER
Serial # 75414
115 Volts
1 Phase

Call Jeff 601-573-1111 (NO EMAILS PLEASE)

Speed Flo 4500 Gas Powered Spray Rig (Brandon, MS) $1500

2009-11-03T11:03:12-05:00

Gas powered paint spray rig. 5.0 hp Honda motor. Comes with hose and spray gun. 601-503-0320

Hobart Handler 135 (Reservoir/Fannin) $325

2009-11-02T14:44:23-05:00

I have a used Hobart Handler 135 welder for sale. I purchased this unit new a few years ago. It has seen very little use. Comes with gauges for use with shielding gas. This is a 115 volt machine and is great for small projects. Runs off of 110V. Email me with any questions.

JACK--20 TON LONG FRAME AIR OVER HYDRAULIC (RICHLAND, MS) $1734

2009-11-02T12:10:57-05:00

CALL 601-932-5003
BRAND NEW Omega 20 ton air actuated (with foot pedal quick lift) long chassis floor jack #22201...

Top of the line jack made by the same people who make LINCOLN, WALKER AND HEIN-WERNER jacks and lift products.
minimum height: 7 1/2"
maximum height: 26 "
handle length - 48"
saddle diameter - 6 1/8"
jack length - 62 1/2"
jack width - 20 3/8"
XTREME SAVINGS FOR SOMEONE WHO'S BEEN WANTING SOME LIFTING POWER
NORMAL SELLING PRICE IS $3400.00
Price is $1734.00 This jack can be loaded on your truck at no additional charge during normal business hours.
For additional charge we can palletize and ship by motor freight.
THIS JACK IS WHAT YOU NEED FOR BIG DUMP TRUCKS, 18 WHEELERS, BUSES AND MOTORCOACHES. Just think---you can lift up to 40,000 lbs.

CALL 601-932-5003

AIR COMPRESSOR 13HP GAS DRIVEN (RICHLAND, MS) $1750

2009-11-02T10:57:31-05:00

CALL 601-932-5003

Industrial 13 HP gas driven Champion (made by Gardner Denver), electric start (battery not furnished) 2 stage aircompressor.
Never used and still in original crate and mounted on a steel pallet ready for mounting to any size air tank (air tank not furnished|)
13 HP Kohler, electric start (battery not furnished|).
Pressure switch factory set at 170 psi cut-out and 140 psi cut back on.
This unit sells for about $3000.00 and was ordered for a that never happened.
Price is $1750.00. We will load on your truck at no charge or for additional charges we will repack and ship motor freight.
IF YOU NEED A COMPRESSOR YA GOTTA SEE THIS ONE!

CALL 601-932-5003

wanted- miller bobcat welder

2009-11-02T08:37:32-05:00

Will consider any conditon. Prefer 250 amp, but will consider 225

6 Foot Stanley Ladder (Brandon,MS) $50

2009-11-01T11:22:07-05:00

I purchased this ladder a couple months ago and then received another one for my birthday. I do not need two! It has been used a couple time in the house. If interested call me 601-672-7700(Justin)

Bed New Servie Truck Bed (Jackson, MS) $2500

2009-11-01T09:19:05-05:00

Brand New Service Truck Bed $2500 OBO.

1997 Dodge Truck/Cummins Diesel/ New Brakes/ AM-FM radio works/AC & Heat Works/ Interior Excellent/ Tires are Fare $2500.

Will sell Service Bed by itself or with the truck, but not the truck by itself. Call Joe @980-254-0867

VACUUM PLASTIC FORMER 24"X30" (Brandon) $250

2009-10-31T15:15:08-04:00

VACUUM PLASTIC FORMER 24X30" VACUUM TABLE SIGN MAKER

Not the toy we had as a kid building model cars, not a dental unit for small jobs molding jobs but a full size (26� x 32�) platform with many accessories for custom fabrication of plastic signs & parts.

The unit Made by �Craft World International Inc� & runs on a simple 220v 30a service and includes the ROD heating unit with vacuum pump to form the part. Also included is a small 5� x 7� 2 ton hydraulic heat press & alpha numeric characters with additional graphic molds. All for you business or pleasure, the only similar unit I could find currently on ebay was being auctioned for $1,925 plus shipping, if you have the need this item is a steal.

24 inch Pipe Wrench Steel (Brandon) $25

2009-10-31T14:04:01-04:00

24 inch Pipe Wrench for $25 Steel Brand name Riddid

Cash only please
Call George at 601-214-9500

tools, hand, power, yard (clinton)

2009-10-31T12:59:00-04:00

cleaning out garage, lots of tools,
Today only now till 5pm
221 willow brook dr, clinton
Don't email as I won't answer

Techforce Scanner (Brandon)

2009-10-31T12:32:26-04:00

Techforce ScannerTechforce Scanner with all leads and connections for imports and domestics. With carrying case.

$998 or best offer

Call me at 601-214-9500 or email me your best offer.

Engine System Analyzer (Brandon) $30

2009-10-31T12:32:00-04:00

Engine System Analyzer
Napa
Set to dwell, to check out engine on older vehicles
$30 Cash only please
Call George at 601-214-9500

*** Globe Inside or Outside Car Lift (Jackson) $350

2009-10-31T12:17:21-04:00

Hot Rod Relics

Our passion is Hot Rods and Building Performance Engines!
Over 40 years experience building/restoring/customizing cars.

Globe Four Post Car Lift

Cable drive, needs some work, but great for a shop!

This can be put outdoors or indoors - whichever works best for you.

$350.00

hattrick classic parts

HILD floor machines (brandon) $80

2009-10-30T14:05:48-04:00

Industrial 13" Hild floor machines, no brushes, no pads. I use them for floor sanding but also work for scrubbing, polishing & more

Air compressor - $50 (Brandon) $50

2009-10-29T21:36:55-04:00

Devilbiss, works great, comes with air hose. $50.

Reply or call 601-214-5705

contractor van shelving (pearl) $500

2009-10-29T18:20:50-04:00

This is van shelving for the interior of a cargo van. It was made by Adrian Steel. This shelving is in good condition and comes with mounting brackets.
shelving like this sells new for $1000.00 or more. Please send me a message or call our office if you would like to take a look at it.
601-939-0797

Air compressor loader/unloader valve (Hazlehurst, MS) $30

2009-10-29T17:48:14-04:00

Genie Loader/Unloader air compressor valve.

Blue Max 4000W Generator (Brandon) $250

2009-10-29T06:07:32-04:00

New Blue Max 4000W 6.5hp generator with two outlets. 4 gallon tank capacity, rated at 7.8 hours continuous running time. Started up once to see how it worked, and never used after that (bought in preparation for a hurricane that never came). Ran a refrigerator and air conditioner at the same time when I first tried it--good power.

FOR SALE - 4500 GENERATOR (BRANDON) $300

2009-10-28T21:52:08-04:00

Kenowa Tools 4500 Generator. Excellent Condition $300

Call (601) 825-0408 or (601) 278-7410

SNAP ON TOOL BOX (MADISON) $2500

2009-10-28T18:15:41-04:00

FOR SALE SNAP ON CLASSIC 78 TOOL BOX WITH TOP AND COVER. DOWN SIZING AND NEED TO MAKE ROOM IN SHOP. THE BOX IS TRACTOR GREEN, THE TOP IS POWDER COATED BLACK AND THE COVER IS BLACK. NOT A YEAR OLD NEEDSTO GO. ANY QUESTIONS OR PICS CALL 601-416-1313.

60 KW Cummins Diesel Generator (PEARL MS) $4500

2009-10-27T22:04:41-04:00

THIS GENERATOR IS A HOUSED UNIT. HAS BEEN LOAD BANKED AT 250 AMPS 240 VAC 60 HTZ 1 PHASE

RAN UNIT 10 HOURS UNDER LOAD NO OIL USED. MAINTAINED 60 PSI OIL PRESSURE HAS NEW( 15")

TIRES AND RIMS. HAS A 2 & 5/16 HTCH ON TRAILER STAYS ON TRAILER FOR YOUR CONVIENCE HAS 6" C CHANNEL FRAME. HAS ABOUT A 50 GALLON FUEL TANK MOUNTED IN CABINET. HAS

MURPHY HIGH TEMPERATURE AND LOW OIL PRESSURE SHUT DOWN PANEL. UNIT IS MANUAL

START. HAS NO MUFFLER AND IS 24 VOLT DC SYSTEM. ENGINE IS A NHC-4B CUMMINS DIESEL

ENGINE. HAS NEW LIGHTS. UNIT IS LOUD. IT IS PROBABLY 25 YEARS OLD BUT REALLY RUNS WELL
((((((((((((((((((((CAN BE WIRED 3 PHASE ANY VOLTAGE CALL 601-573-9105)))))))))))))

Weatherguard Ladder Rack (Florence, MS) $250

2009-10-27T18:51:28-04:00

Short wheel base bed or Extended Cab bed - Color Black - Adjustable - Like New!

Call Randy 601-668-4168

3500 Watt Generator (Winona, MS) $500

2009-10-27T18:09:37-04:00

This generator is new, never been used. Has four 110 outlets and one 220 outlet. Sells for around 650.00 at Lowes. Asking 500.00 or best offer. Contact me at 662-739-2975.

2006 WELLS CARGO LANDSCAPE TRAILER (BYRAM ) $9800

2009-10-27T14:31:37-04:00

8 ft x 24 ft Cargo Trailer
Year: 2006
Manufacturer: Wells Cargo
Model: EW2424
Axle Type: Tandem Axle
Hitch Type: Bumper
Color: Designer Beige
Vin #: 1WC200L2161114997
Inventory: 1 in Jackson FM

Base Price: $7,395.00
Selling Price: $16,372.00

Features & Options Included: LED Safety Pkg.
Landscape Package
3/8" Exterior Grade Plywood Sidewall Lining
3/4" Pressure Treated Plywood Flooring
Frame Crossmembers on 16" Centers
Aluminum Tread Plate Fenders or Fenderettes
Rear Ramp Door with Spring Assist
Slip Resistant Ramp Edge Protector
Corner Post Stabilizer Jacks
Aluminum Tread Plate Stone Guard
Protective Barrier Between Floor and Sidewall
Side Entry Door DELETED
Flow-Thru Sidewall Vents (2)
Spare Tire & Wheel
Spare Tire Carrier
12 Volt Dome Lights (2)
Wall Switch (1)
First Aid Kit
3/4 Inch Wall Liner
Anodized Aluminum Roof Cove & Trim
12-Volt Dome Light with Optic Lens ($34 Option)
3-Way, 12-Volt Wall Switch ($62 Option)
Tool Organizer Package
Vinyl Covered Rack for Back Pack Blower
Vinyl Covered Rack for Back Pack Sprayer
Vinyl Covered Rack for Hedge Trimmer
Vinyl Covered Rack for Line Trimmers
Vinyl Covered Rack for Hand Tools
Vinyl Covered Rack for 5 Gallon Gas Can
Vinyl Covered Rack for Water Cooler
12" H x 16" D Expanded Metal Storage Bin Mounted Full Width Across Front Wall

Specifications: Torflex Rubber Torsion Suspension
Tandem Axle With 15" Tires
GVMR: 10000 lbs.
Payload Capacity: 6725 lbs.
Cubic Capacity: 1109 Cubic Feet
Hitch Ball Size: 2 5/16" Adj Coupler
12-volt Connector: 7-Way
32 Gallon Fuel Tank with Hand Pump, 8 Ft. Hose and access from outside
4-Wheel Electric Brakes
Scorpion Floor Liner

THIS TRAILER HAS NEVER BEEN TITLED. WHEN YOU BUY IT YOU WILL GET THE FULL 6 YEAR WARRANTY. IF YOU ARE A RESIDENT OF MS YOU WILL HAVE TO PAY TAX AND A TITLE FEE.

Commercial tool box (Brandon/ Rankin) $70

2009-10-26T22:35:31-04:00

Heavy commercial tool box that mounts on the side of full size truck ,or on front of 16x7 trailer.
It was white but I clean it up and sprayed it black. Has lock but no key. Major brand you can buy at Chevy dealer,
GREAT PRICE!!!! Picture available . Call my cell at 601-946-3935

Metal Lathe/ Mill (Brandon, MS) $1100

2009-10-26T19:47:52-04:00

Smithy Midas 1220 lathe/mill with tooling. Knurling tool (2), 1/2" and 3/8" end mill holders, machinist clamping set, magnetic base dial indicator, V-block set, dead center (2), live center, boring bar, fly cutter set, thread cutting tool, cut-off tool, digital caliper, plus various end mills and lathe bits. This machine is 1 year old and has less than 15 hours of use. Includes the manual and instructional DVD. $1100.00
E-mail or call 601-398-5068 with any questions.

DeWalt Air Compressor and Two Nails Guns (Clinton, MS) $225

2009-10-26T18:55:32-04:00

DeWalt Finish Nailer / Brad Nailer and Air Compressor Combo Kit. The third box was included in the picture by mistake. It si a jigsaw that is not for sale.

Model Number: D55141FNBN

Receipt included if needed. $225 obo.

AIR COMPRESSOR-13HP GASOLINE DRIVEN (RICHLAND, MS.) $1750

2009-10-26T15:49:53-04:00

20 TON AIR/HYDRAULIC LONG FRAME FLOOR JACK (RICHLAND, MS) $1734

2009-10-26T15:39:09-04:00

Tracing Lathe (Birmingham Area)

2009-10-26T15:25:52-04:00

Wasino LAC Automatic Tracing Lathe, 18" swing x 30" centers, 10" hydraulic chuck. Please call 205-577-2656 for more information or to make an offer.

Commercial grade pressure washers (Philadelphia, MS)

2009-10-26T09:53:28-04:00

1 - 3500 psi $350.00
2 - 4000 psi $400.00
Both run well. Call for details Ron 601.416.1197

Milwalkie H.D. Right Angle Drill (Brandon) $200

2009-10-26T03:19:11-04:00

Used one time. Comes with case, and all accessories. Excellent condition and strong as an ox.

NEW Tool Belt Drill Assessory Holder Craftsmen (Byram) $10

2009-10-25T22:39:03-04:00

Brand new.

Snap-On Digital Oscilloscope (brandon) $150

2009-10-25T14:33:26-04:00

It�s a snap on counselor MT-1664 AC/DC powered digital Oscilloscope with a Multimeter
MT1426 voltmeter dwell meter and tachometer. Cables manual and rolling shop cart

If you need one you should take a look at this�.

Arc Welder NEW (Pearl ) $140

2009-10-24T22:07:42-04:00

This welder was never used it has just been sitting in my storage room collecting dust. Chicago Elec. Arc 180. 220 Plug. Has the manual paid around $200.00 for it new. Was never used. Please call sam @ 770-845-9902 or email flamethrowerb22@yahoo.com

Milwaukee Hole Hawg drill (Collinsville, MS) $50

2009-10-24T18:09:58-04:00

I have for sale a used Milwaukee Hole Hawg right angle heavy duty drill, commonly used by plumbers, electricians and others to drill through wall studs or other tight places. This drill has been used on a regular basis, and has scrapes and scuffs as would be expected of a used tool. It runs OK, but may need a new set of brushes-- easy to do.

WANTED : Table Saw (Collinsville, MS)

2009-10-24T17:59:11-04:00

I'm looking for a good used table saw. Prefer 10 inch or 12 inch saw. Please email with details ( make, condition, and asking price).

JB

Halogen work light - $10 (Brandon) $10

2009-10-24T17:51:01-04:00

New, box has never been opened. $10.

Reply or call 601-214-5705

Adjustable work table - $15 (Brandon) $15

2009-10-24T17:44:04-04:00

Good shape. $15.

Reply or call 601-214-5705

SANDBLASTING EQUIPMENT (SAUCIER) $4400

2009-10-24T12:49:53-04:00

THE EQUIPMENT IS ALL A 2008 MODEL, THE PAINTING EQUIPMENT IS ALSO FORSALE. $$$ 4,400 OBO, $$$ 1,600 OBO FOR SPRAY RIG. THE TRAILER CAN ALSO BE SOLD $$$ 1,300 CALL FOR MORE DETAILS 228-861-5155

33 ft Scissor Lift for Sale (Brandon) $3400

2009-10-24T11:34:18-04:00

I have a 33 ft Scissor Lift for sale..
Indoor or outdoor, no job is too hard anymore!!!!

Call Tim 601-668-0374

DeWalt 18v Tool Set (Byram) $175

2009-10-23T09:37:21-04:00

I have three DeWalt 18v cordless tools for sale. This was the 4pc. combo that DeWalts sells but I lost the drill and one battery sometime back. I have the reciprocating saw, snake light, skil saw, charger, case, and one battery for sale.

Carpet kicker tool and New Box of Tack Strips (Jackson) $80

2009-10-23T00:59:00-04:00

I have a practically new adjustable carpet kicker and a box of wood subfloor tack strips up for sale. I purchased them from Lowes to install carpet in my house. I did one room and decided I liked my hardwood floors, so now they're up for sale. I used 10 tack strips out of 100. $80.00/OBO

STANLEY-BOSTITCH Brad Nailer (Richland) $75

2009-10-22T21:24:20-04:00

Like new, great for trim work, shoots 5/8" - 2" brad nails, comes with hard case and some nailes, $75.00

STANLEY-BOSTITCH Finish Nailer (Richland) $120

2009-10-22T21:23:35-04:00

Like new, great trim gun, ready to work, shoots 1" to 2 1/2" nails, comes with hard case and some nails, $120.00

18V. Snap Drill (Clinton/Brandon) $300

2009-10-22T21:00:43-04:00

I have an 18 Volt Snap on Hammer drill that's never been used. It comes with two batteries and a charger. It cost $429.95 new on snap-on's website. Email me at whiteheadk62@yahoo.com or text me at 6019859927.

grit-0-cob (brandon) $15

2009-10-22T18:39:55-04:00

Yes everyone it�s Grit-o-Cob Blasting Media, forget sand, soda & try the corncob media of choice. Why remove delicate glass & chrome components when you can just blast over them. I was doing a large project but now I find myself with a 30 extra bags, my loss, your gain $15 per 40lb bag I also met a fireman this morning that was using cob for cleaning brass, good idea.

You can pay retail ozarkloghomes.com, & they charge shipping
� 20/40 Grit For Normal Cleaning
o 1 to 5 Bags $32.00/bag
o 6 to 24 bags $26.00/bag
o 25 or More Bags $23.00/bag

2008 Bona X 220 Floor Sander $3500

2009-10-22T15:37:48-04:00

2008 BonaX 220 10 inch belt floor sander comes with sand paper, cord and bag. $3500.00 obo email or call 7697983218

Assorted Dry Wall Tools (Jackson, MS) $15

2009-10-21T00:04:00-04:00

Collection of assorted dry wall tools. Still in good shape. Super deal for only $15!!!!! Email me with any questions or call 601-608-8873. Thanks.

Tool Box/Shelf For Cargo Van (Jackson, MS) $40

2009-10-21T00:02:46-04:00

This is a super good deal!!! This is a great component to have in your van. Organize all your tools and small pieces. Email me with any questions or call 601-608-8873. Thanks.

CORNWELL TOOLBOX (TERRY MS) $5000

2009-10-20T17:37:17-04:00

I HAVE A CORNWELL TOOL BOX..MEASURES 108"..ALMOST 6FT TALL. $5000 CASH OR ILL TRADE IT FOR A NICE RIDE OF EQUAL VALUE. LEMME KNOW WHAT YOU GOT AND WELL TALK. MSAUTOTECH@YAHOO.COM or 601-750-7946

5 foot Hunter Zephair shop fan (south Jackson) $50

2009-10-19T16:54:20-04:00

5 foot square, 26 inch wide box. 48 inch blades. Needs 1/2 or 3/4 horse motor.

Call for appointment to see or buy. Good condition, old but powerful. $50 firm.

601-506-8939

AIR COMPRESSOR - 13 H.P. GASOLINE DRIVEN (RICHLAND, MS.) $1750

2009-10-19T15:11:37-04:00

20 TON AIR/HYDRAULIC LONG FRAME FLOOR JACK (RICHLAND, MS.) $1734

2009-10-19T15:10:59-04:00

New Bosch angle driver (brandon) $85

2009-10-19T14:26:58-04:00

I have 2 new Bosch ps10-2a drivers I will take 85.00 each for them... they sell for $150.00 in stores and NO these are not ""hot"" see picture thanks ronnie 601 953-8138

Craftsman 15.6v Cordless Drill (Madison, MS) $65

2009-10-19T10:48:26-04:00

Craftsman model 315.114630 cordless drill and flashlight in case.
2 batteries and all additional bits and drivers (torx, hex, etc.) included.
I bought this drill new and it has been used maybe a dozen times to hang curtains and blinds in my home.
NEVER USED IN CONSTRUCTION. I am selling in order to upgrade.
Phone 601-832-9027

NEW Milwalkee H.D. Right Angle Drill (Brandon) $200

2009-10-19T09:00:07-04:00

Used once. Paid 340, only asking 200. Comes with case, side handle, and extension.

metal tables on wheels (terry) $200

2009-10-18T18:44:41-04:00

metal table on wheels 10' x 5' $200.00 & 4' x4' you pick 601-878-2480

summit 14 x 40 lathe (terry) $3500

2009-10-18T18:39:55-04:00

summit lathe 14 x 40 3-phase excellent condition w/ x & y digital read-out , needs compound nut $3500.00 call 601-878-2480

hand power angle iron cutter (terry) $50

2009-10-18T18:35:27-04:00

angle iron cutter by hand $50.00 call 601-878-2480

HD ladder rack long wheelbase (terry) $300

2009-10-18T18:18:57-04:00

custom made HD ladder rack w/cab-over for long wheelbase $300.00 obo call 601-878-2480
best ladder rack you can buy

ridgid 700 (pony) threader (mccomb,ms.) $1000

2009-10-17T17:32:52-04:00

ridgid 700 threader in good condition,works great,very strong with dies from 1/2"-2"npt. going out of plumbing business call craig at 601-249-2092 after 6pm or leave message

Metal Truck Toolbox (Jackson, MS) $100

2009-10-17T13:08:07-04:00

I have a metal toolbox for sale, it measures, 20 inches wide, 36 inches long, and 17 inches deep. I had this in the back of my Ford Ranger and then it got wrecked, so now I have an expedition and have nowhere to use this now. I paid around $400 when i bought it. It does show signs of uses, scratches, dings, but is still in good shape and strong as ever. It does have the built in lock with it but not sure where the keys are, i am still looking for those for it, i never did lock it so i never used them. Thanks for looking, this is cash only, no checks, money orders, etc etc. The first person to bring $100 can have it so if interested you can call me at 601-317-1811. Thanks!

BLASTING AND PAINTING EQUIPMENT (SAUCIER) $6500

2009-10-17T11:31:21-04:00

Gettting out of the business, new or close to it equipment, MARCO blast pot and filter, volume tank, tools and supplies for any job, GRACO XTREME airless, 100+ ft. of hoses for everything, NO compressor, it is set up for a 185 cfm, everything is on a trailer, can let it go for a $$$ 1,000 xtra, equipment only is $$$ 6,500 228-861-5155 will consider trade for a 4x4 truck

Cement/Mortar Mixer (Hazlehurst/Wesson) $225

2009-10-16T17:25:03-04:00

Product by IMER, electric motor. Purchased at Home Depot for about $400, used twice. See pictures

For more information call: 601-695-6970

Looking for small wire welder (brandon,ms)

2009-10-15T21:17:14-04:00

Im looking for a small wire welder at a reasonable price email me if you have one tommyr032@yahoo.com

Toolbox for Sale (Jackson, MS) $100

2009-10-15T09:36:24-04:00

I have a metal toolbox for sale, it measures, 20 inches wide, 36 inches long, and 17 inches deep. I had this in the back of my Ford Ranger and then it got wrecked, so now I have an expedition and have nowhere to use this now. I paid around $400 when i bought it. It does show signs of uses, scratches, dings, but is still in good shape and strong as ever. It does have the built in lock with it but not sure where the keys are, i am still looking for those for it, i never did lock it so i never used them. Thanks for looking, this is cash only, no checks, money orders, etc etc. $100 obo. If interested you can call me at 601-317-1811. Thanks!

tablesaw (madison) $400

2009-10-14T22:41:21-04:00

delta 10" contractors tablesaw with 54" rip fence system. perfect working condition.

wagner wide shot max painter (clinton, ms) $40

2009-10-14T21:48:41-04:00

Paint gun for larger paint jobs. Rarely used. Still clean. Box and instructions in tact. $40.00 obo.

truck tool box (jackson) $50

2009-10-14T13:40:40-04:00

stainless steel tool box fits ford ranger size truck.inside width 4ft3in.601 405 6556

SEARS Router (Brandon) $35

2009-10-13T15:55:25-04:00

Sears router. $35.00. Used twice. 601 824 9254

WANTED - Auto Paint Booth (Central MS)

2009-10-13T13:01:07-04:00

Looking for a used auto paint booth - complete. I can disassemble and remove. I'll go as far as 3 hours from Jackson. Not looking for infrared, downdraft, or anything else expensive. E-mail me and I'll come take a look.

Black and Decker 10" FireStorm Miter Saw (Jackson, MS) $150

2009-10-12T19:07:22-04:00

This 10" black and Decker Fire Storm Miter Saw is practically brand new. Has only cut 4 pieces of trim. Really good saw.

Ladder/Pipe Rack (White Oak/Smith County) $175

2009-10-12T11:12:47-04:00

Weatherguard brand Ladder/Pipe rack taken off short wheel base Ford Ranger. In excellent shape. Pls contact @601-497-2021.

Cooper Lighting WZT1500 Twin Work Light (Brandon) $60

2009-10-11T17:15:09-04:00

Used Cooper Lighting WZT1500 Twin Work Light. Excellent working condition! Call 601-906-8481 or 601-906-0277 or reply to this post.

1999 F-450 7.3 Truck With Crane (Pearl Ms) $15500

2009-10-11T13:47:37-04:00

THIS TRUCK HAS 7.3 POWER STROKE WITH 136,000 MILES IS 4 SPEED WITH OVERDRIVE.

HAS A 11 FOOT SERVICE BED 6000 # HYDRAULIC NEW HOLLAND CRANE HAS NEW FRONT

AND REAR BRAKES. NEW BATTERIES, NEW BRAKE MASTER CYLINDER IS A SOLID WORK

TRUCK. IT IS SINGLE CAB. PICTURES WILL FOLLOW ALL REASONABLE OFFERS CONSIDERED

WILL POSSIBLY DO SOME TRADING. IS WHITE IN COLOR. CALL 601-573-9105 ANY REASONABLE

OFFER CONSIDERED. WILL EXTEND UP TO 18 FEET HIGH

truck toolbox $50

2009-10-11T08:17:37-04:00

I have a truck toolbox for sale that fits a ford f-250. It is a black CargoMax in great condition almost like new.$50.00 is a firm price. You can contact me wayne at 601-624-6903. Madison, MS

Sata Jet 3000 RP (Richland, MS) $350

2009-10-10T11:06:30-04:00

I have a brand new used twice Sata Jet 3000 RP paint gun. I purchased it new at Ryan Supply on Silas Brown for 679.00, I sprayed clear through it two times, but it sprays to much material for how I paint. My loss is your gain. It also has the Digital Air Micrometer built in to it so no more guessing about air pressure. Email A_risher@rocketmail.com or text or call 6017206256..

brand new acutrac 3 satellite meter (flowood, ms) $180

2009-10-09T09:45:48-04:00

i have a new acutrac 3 satellite meter for sale. it can receive 99,101,110,119, and international. this is the best meter i have used yet. still has the plastic on the face. comes with car charger. please call 601-291-2303 or 601-776-2836. thank you

13' werner superfold extension ladder (flowood, ms) $50

2009-10-09T09:45:38-04:00

i have a like new werner superfold ladder. great for everything. regular 65.00 at lowes. please call 601-291-2303 or 601-776-2836

satellite start up kit (flowood, ms) $240

2009-10-09T09:45:13-04:00

i have roll of duel cable, roll of single cable, ground blocks, very nice carrying case, split bolts, bag of connectors, bishop tape, roll of cat 3, multiswitches, 2" poles, pole setter, barrells, and much more. i will sell as a package or we can work something out splitting it up. please call 601-291-2303 or 601-776-2836.

Science Tutor (General Science - Biology) (Jackson MS) $25

I am looking for students who are in need of general science or biology tutoring.
Qualifications:
Bachelors of Science in Biological Sciences - Mississippi College
Masters of Science in Biological Sciences - Mississippi College
Certified General Science and Biology Teacher
Previous Tutoring Experience with Middle School Students

I am looking primarily for students in the North Jackson area. If you are interested please email me so that we can set up a time.

Thank you.